Bosch D7412G Program Entry Guide

D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN EN | 19
Bosch Security Systems | 10/03 | 47775E
Restoral Reports are not sent if the
control panel is reset after a point is
bypassed and then the point is
unbypassed. This is true for both Fire and
Non-fire points.
The 9000 Series Control Panels log a
Ground Fault Event as Trouble Point 256.
User Reports
Selecting Yes enables a report to be sent when the
event occurs.
Table 11: User Reports
Report Selections Description
R# Point
Bypass
Yes, No
Reports Point
Bypass Event.
R# Forced
Point
Yes, No
Reports Forced
Point Event.
R# Point Open
Yes, No
Reports Point
Opening Event.
R# Point Close
Yes, No
Reports Point
Closing Event.
R# Forced Arm
Yes, No
Reports point forced
armed.
R# Fail To
Open
Yes, No
Reports Fail to
Open Event.
R# Fail To
Close
Yes, No
Reports Fail to
Close Event.
R# Ext Clos Tm
Yes, No
Reports Extend
Close Time Event.
R# Opening
Rpt
Yes, No
Reports Opening
Events.
R# Forced
Close
Yes, No
Reports Point
Forced Close Event
R# Closing Rpt
Yes, No
Reports Closing
Events.
R# FC Perim
Inst
Yes, No
Reports Forced
Close Perimeter
Instant Armed Event.
R# FC Perim
Delay
Yes, No
Reports Forced
Close Perimeter
Delay Armed Event.
R# Perim Inst
Arm
Yes, No
Reports Perimeter
Instant Armed Event.
R# Perim Delay
Arm
Yes, No
Reports Perimeter
Delay Armed Event.
R# Send User
Text
Yes, No
Reports user text.

Bosch D7412G Specifications

General

Partitions	8
Power Supply	16.5 VAC, 40 VA
User Codes	99
Users	99
Communication Formats	Contact ID, SIA
Operating Temperature	0°C to +49°C (32°F to +120°F)