D9412G/D7412G | Program Entry Guide | 1.0 Introduction EN | 5
Bosch Security Systems | 10/03 | 47775E
1.0 Introduction
1.1 How to use this Program Entry Guide
This guide addresses the programming of the
D9412G/D7412G Control Panels only, and should not
be used in conjunction with other control panels.
Although this guide specifically refers to the D9412G
Control Panels, it can be used for programming the
D7412G Control Panels. Differences between the
D9412G and D7412G are shown Table 2.
1.2 Literature Referenced
Throughout this guide, references are made to other
documents. See Table 1 for a part numbers list of the
referenced literature for ordering purposes.
Read the following documents before installing and
programming the products.
Table 1: Literature Referenced
Document Name Part Number
1. D1255 Installation Instructions
74-06819-000
2. D1256/D1257 Installation
Instructions
74-06925-000
3. D1260 Installation Guide
48101
4. D1260 Owner’s Manual
50410
5. D5200 Operations Manual
74-06176-000
6. D6500 Report Directory
74-04651-001
7. D6600 Communications
Receiver/Gateway Computer
Interface Manual
39963
8. D720 Installation Instructions
74-06918-000
9. D9210B Operation and
Installation Guide
32206
10. D9210B Program Entry Guide
32207
11. D9210B Program Record Sheet
32208
12. D9412G/D7412G Operation
and Installation Guide
43488
13. D9412G/D7412G Program
Record Sheet
47488
14. RPS Operations Manual
38849
1.3 Differences Between the D9412G
and D7412G
Table 2 describes the differences between the D9412G
and the D7412G Control Panels.
Table 2: Differences between the D9412G and
D7412G
Features D9412G D7412G
Access Control Yes
Eight Doors
Yes
Two Doors
Expanded users
Arm/disarm
Passcodes
Cards/tokens
249
996
99
396
Passcode-protected
custom functions
16 4
Number of printers 3 1
Number of points 246 75
Number of relays 128 64
To Next Page
Loading...
Need help?
General
