Bose ControlSpace AMS-8 Safety Instructions & Installation Guide

English
23
7. Technical specifications
Inputs:
Type: 8x analogue (up to 16), unbalanced and electronically balanced, line-level
Connectors: RCA and 3 pin Euro block
Input Sensitivity: -30dBu to +14dBu
Impedance: 50K Ohms
Input clip level: +14dBU
Digital resolution: 24-Bit
Outputs:
Type: 8x analogue, unbalanced and electronically balanced, line-level
Connectors: RCA and 3 pin Euro block
Impedance: 150 Ohms
Maximum output level: 18dBu Balanced, 12dBu Unbalanced
Bass/Treble control: +/-12dBu, in steps of 1 dB
Digital resolution: 24-Bit
Signal Processing:
Type: 48-bit floating point, Digital Signal Processors
Sampling Rate: 96 kHz
Audio Latency: <1ms
Delay: 10ms, in steps of 0.05ms
Frequency response:
20 Hz to 20 kHz (+0dB,-0.3dB)
THD:
<0.007% (A-weighted, 0dBu in/0dBU out)
Channel separation:
>103 dB @ 1kHz, 0dBu
Signal-to-noise ratio:
>100dB, A-weighted, THD<0.02%, balanced in/out
>100dB, A-weighted, THD<0.02%, unbalanced in/out
110dB, A-weighted, THD<0.02%, analogue in to digital out
140dB, A-weighted, THD<0.02%, digital in/ digital out
Electrical:
Power supply Power
consumption
Size
(H x W x D in mm)
Weight
CS AMS-8 90 - 264 Volt AC
(47-63Hz)
37 Watt maximum 88 x 485 285 4.5 kg
CS-WC 12 - 24 Volt DC 0.7 Watt maximum 80 x 115 x 48 0.12 kg
CS-LIM 24 Volt DC 1.5 Watt maximum 80 x 115 x 48 0.12 kg
CS-PP 12 - 24 Volt DC 1.7 Watt maximum 43 x 210 x 212 1.5 kg
Environmental:
Operating temperature: 0˚C up to 50˚C
Humidity: 80% relative humidity (without condensation)v
7. Technical specifications

Bose ControlSpace AMS-8 Specifications

General

Brand	Bose
Model	ControlSpace AMS-8
Category	Stereo System
Language	English