Briggs & Stratton VANGUARD 810 EFI User Manual

28 Section 2: Troubleshooting DTCs
DTC P0113 Manifold Air Temperature (MAT) Sensor
Scan Diagnostics
Step Action Yes No
1
1. Select the Dashboard ribbon and then the Sensors
tab.
2. Under Temperature heading, observe MAT Sensor Ac-
tual display with or without the engine running.
3. Is reading 0.5-4.5 volts DC?
MAT sensor
circuit OK.
Go to step 2.
2
Is reading above 4.5 volts DC?
Go to DTC P0113
Non-Scan
Diagnostics.
-
Figure 2-18 Check MAT Sensor Actual Display.

Briggs & Stratton VANGUARD 810 EFI Specifications

General

Brand	Briggs & Stratton
Model	VANGUARD 810 EFI
Category	Engine
Language	English