12
■ Operation panel
1 “Start/Stop” button
Press the “Start/Stop” button to start or stop the machine. The
lighting status and color of the button changes depending on
the operation condition of the machine.
2 Thread trimming button
Press the thread trimming button to trim both the upper and
the bobbin threads.
3 Automatic needle-threading button
Press the automatic needle threading button to thread the
needle.
4 Speaker
5 LCD (touch panel)
Touch the keys that appear on the touch panel to select and
edit patterns and confirm various information.
Included accessories
After opening the box, check that the following accessories
are included. If any item is missing or damaged, contact your
authorized Brother dealer.
Lit in red : When the machine cannot start
embroidering
Flashing in green : When the machine can start
embroidering
Lit in green : While the machine is embroidering
Flashing in orange : When the machine can cut the
thread
Off : When the machine is turned off
Part Name
Part Code
1. Accessory case
XC6482-051
2. Needle set × 2
XC6469-001
3. Prewound bobbin × 6
XH3619-001
4. Spool net × 10
S34455-000
5. Seam ripper
XF4967-001
6. Scissors
XF2052-001
7. Tweezers
XC6542-051
8. Touch pen
XA9940-051
9. Threader
XE8362-001
10. Needle changing tool
XF0793-001
11. Needle plate cover
XC6499-151
12. Spacer (on machine)
XF1978-001
13. Phillips screwdriver
XC6543-051
14. Standard screwdriver
X55468-051
To Next Page
Loading...
Need help?
General
Weight and Dimensions
