Brother PR1055X User Manual

GETTING READY
21
1
Attaching the embroidery frame holder
a
Use the embroidery frame holder appropriate for the
embroidery frame that you are using (page 66 to
page 68).
b
Remove the two thumb screws of the embroidery
frame holder.
1 Thumb screws
2 Corner covers
c
Align the holes in the embroidery frame holder with
the pins on the frame-mounting plate of the carriage.
1 Pins on the frame-mounting plate
2 Holes in the embroidery frame holder
3 Corner covers
d
Secure the embroidery frame holder with the two
thumb screws removed in step
b.
1 Thumb screws
This completes the preparation of the machine.
Note
• Using the 3 way screwdriver included, loosen and
firmly tighten the thumb screws.
1 Use this part to tighten the thumb screws of the
embroidery frame holder.
Note
• Each embroidery frame holder has different color of
corner cover.
Holder A: White corner covers
Holder B: Light gray corner covers
Holder C: Dark gray corner covers (Optional)
a
Note
• Two types of embroidery frame holders are
included with this machine. Embroidery frame
holder A is used with the four included embroidery
frames. (page 66)
• Refer to page 67 for hoops used with frame holder
B and other optional frame holders.

Brother PR1055X Specifications

General

Type	Automatic sewing machine
Display	LCD
Free arm	-
Interface	USB
Control type	Touch
Sewing speed	1000
Product color	White
Buttonhole type	10 One-step
Number of fonts	37
Automatic buttonhole	Yes
Sewing machine functions	Embroidery
Number of embroidery designs	1184
Power supply type	Electric

Weight and Dimensions

Weight	55500 g