88
■ Continuing embroidering
To embroider the same pattern again, touch .
The embroidering screen appears so the same pattern
can be embroidered again.
To select a new pattern, touch .
The pattern type selection screen appears.
Stopping embroidering
The machine can be stopped during embroidering.
■ Temporarily pausing
a
Press the “Start/Stop” button.
The machine stops and the “Start/Stop” button lights
up in red.
• Embroidering can also be stopped by touching an
area displaying the pattern.
• The thread is not trimmed.
• To continue embroidering, after checking that the
upper thread is taut, touch the unlock key, and then
press the “Start/Stop” button.
■ Temporarily pausing for extended periods of
time
a
Press the “Start/Stop” button.
The machine stops and the “Start/Stop” button lights
up in red.
• The thread is not trimmed.
b
Touch to unlock the machine.
c
Press the thread trimming button.
The bobbin and upper threads are trimmed.
• Before turning off the machine, be sure to trim the
threads.
d
Set the main power switch to “O” to turn off the
machine.
The display and the “Start/Stop” button indicator go
off.
• Embroidery can resume after the machine is turned on
again. Back up several stitches to overlap the
stitching. (page 97)
■ If the thread breaks while embroidering
If a problem occurs while embroidering, such as if the
thread breaks, the machine stops automatically.
Re-thread the broken thread, back up several stitches, and
then continue embroidering. (page 93)
• When embroidering a pattern that contains 11 or
more colors, it is necessary to change the thread
spools. (page 91)
• Automatic lock stitch setting can be set so that it is
performed at the beginning of the embroidery,
when starting to embroider after changing thread
colors, and when trimming the thread. (page 71)
• If the reserve stop key is touched while embroidery
is being performed, the machine stops
embroidering before the next color begins.
(page 119)
• Before starting to embroider, the machine can be
set to stop at any thread color change. (page 119)
• The machine can be stopped at any time, even
while it is embroidering; however, if the machine is
stopped when the thread color is changed, it is not
necessary to go back through the stitching when
embroidering is continued. The machine can be set
to stop when the thread color is changed.
(page 119)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
