Canon imagePRESS C6010 - Puncher Unit-BB1; Document Insertion Unit-C1

Version 2 imagePRESS C6010 Customer Expectations Document Page 36
6.11 Puncher Unit-BB1
Item Specifications
Paper Size/Weight/Type
Size: 11” x 17”, LGL
*1
, LTR, LTRR
*1
, or EXEC
Weight: 16 lb bond to 73 lb cover (60 to 200 g/m
2
)
Type: Thin, Plain, Heavy, Recycled, Color, Bond Paper, Tab Paper,
Coated, Texture Paper
*1 For two holes only.
Punch Hole Quantity,
Hole Diameter
Two holes: 3/8” (8 mm)
Three holes: 3/8” (8 mm)
Distance between Punch
Holes
Two holes: 2 3/4” (70 mm)
Three holes: 4 1/4” (108 mm)
Paper Size in Which Holes
Can be Punched
Two holes: LGL and LTRR
Three holes: 11" x 17” and LTR
Punch Waste Tray
Capacity
When approximately 6,000
*1
sheets of paper have been punched.
*1 This number may vary, depending on the surrounding environment, paper
type, and paper weight.
Power Source
From the finisher.
Weight
Approximately 6.6 lb (3 kg) inside the finisher
6.12 Document Insertion Unit-C1
Item Specifications
Paper Size/Weight/Type
Upper Tray: LTR, LTRR, EXEC, and Irregular Size (7 1/8” x 7 1/8” to
11 11/16” x 13” (182 mm x 182 mm to 297 mm x 330.2 mm))
Lower Tray: 13” x 19”, 12” x 18”, 11” x 17”, LGL, LTR, LTRR, EXEC, and
Irregular Size (7 1/8” x 7 1/8” to 13” x 19 13/64”
(182 mm x 182 mm to 330.2 mm x 487.7 mm))
Weight: 16 lb bond to 110 lb cover (60 to 300 g/m
2
)
Type: Thin, Plain, Heavy, Recycled, Color, Pre-punched, Bond Paper,
Coated, Texture Paper, Vellum
Paper Capacity
Upper Tray: 200 sheets (20 lb bond (80 g/m
2
))
Lower Tray: 200 sheets (20 lb bond (80 g/m
2
))
Power Source/Maximum
Power Consumption
From the finisher.
72 W
Dimensions (H x W x D)/
Weight
8 3/8” x 24 5/8” x 26 1/4” (213 mm x 625 mm x 667 mm)
Approximately 37.4 lb (17 kg)
Installation Space
(W x D)
135 7/8” x 45 3/8” (3,451 mm x 1,152 mm)