Version 2 imagePRESS C6010 Customer Expectations Document Page 40
6.17 Booklet Trimmer-D1
Item Specifications
Margin Trimming Method
Upper knife reciprocating fore-edge
Trim Amount
0.08” to 0.78” (2 mm to 20 mm)
Maximum Number of
Sheets
*1*2
50 sheets (20 lb bond (80 g/m
))
48 sheets (20 lb bond (80 g/m
2
)) + 2 sheets (110 lb cover (300 g/m
2
))
Acceptable Paper Sizes
*3
13” x 19.2”, 12” x 18”, 11” x 17”, LGL, LTRR
Acceptable Paper
Weights
16 lb bond to 120 lb cover (60 to 325 g/m
2
)
Booklet Waste Tray
Capacity
1,500 sheets of trimmed strips
(width 0.78” (20 mm), LTR paper (20 lb bond (80 g/m
2
))
Conveyor Capacity
*4
Conveyor belt - 30 booklets
(or 40 sheets of an LTR booklet (20 lb bond (80 g/m
2
))
Power Source
From the finisher.
Maximum Power
Consumption
300 W
Dimensions (H x W x D)/
Weight
41” x 62” x 30 3/8” (1,040 mm x 1,575 mm x 770 mm)
(without conveyor and delivery tray)
Approximately 335 lb (152 kg)
*1 If the cover sheet is thinner than the other sheets in the booklet, the cover sheet may be scratched. It is
recommended to use a thicker sheet for the cover sheet.
*2 The maximum number of sheets that can be trimmed may differ, depending on the main machine.
*3 The possible trim size may change, depending on the main machine.
*4 The Two-Knife Booklet Trimmer-A1 does not come with a conveyor tray. It can only be used with the
optional Booklet Trimmer-D1’s conveyor tray. Therefore, the conveyor capacity is the same as the
booklet trimmer’s conveyor tray.
To Next Page
Loading...
Need help?
General