38
Installation
Precautions on power cord
Your AC power cord should meet regulations of the country/district where your projector is
used.
Make sure you are using a valid AC power cord.
In case the included AC power cord does not comply with the AC power socket in your
location, call your dealer for replacement.
The projector side Connect to the AC power socket
Connect to power cord connector of
your projector
Connect to AC power socket
Grounding end
Connect the AC power cord
Standard voltage employed by your projector is AC 100-240V. It adapts to different input volt-
age automatically. Your projector employs single-phase power cord with neutral ground cable.
Do not use any other type of power cords or you may face the risks of electric shock. In case
you have any doubt on type of power cord you are using, please call authorized dealer or ser-
vice center for help. Before powering on your projector, get all external equipment connected
in advance.
Keep your AC power socket close to your
projector for easy plugging and unplugging.
Note:
Note:
one to ensure product performance and operation safety.
Note:
For safety reasons, unplug the AC pow-
er cord when your projector is not in
use. Your projector will consume a small
amount of power when it is connected to
AC grid power and in standby mode.
Connect included AC power
cord to your projector.
To Next Page
Loading...
Need help?
General
