98
Maintenance and cleaning
Note:
lens assembly and deteriorate image quality.
Do not insert any small object in the air outlet. It may fail your projector.
Clean the lter
reduce cooling fan effects, which, in turn, will
overheat your projector and shorten its life
the Filter Warning icon displays.
1. Power off your projector and unplug from
AC power source.
3. Gently clean it with a brush.
power supply.
Filter cover
Fuzz
Recommendations
Please do not use your projector at place of
dust and smoke. This may affects image qual-
ity. Using your projector in place of dust and
smoke may lead to piling dusts on lens, LCD
panel, and lens components within it. In case
like this, call your dealer or service center for
correct cleaning.
Note:
its cleaning or replacement.
1 Press MENU button and the OSD displays.
Press button to select Setup menu,
press button or OK.
2 Press button to select "Filter Counter",
press button or OK. Press button to
displays. Select Yes to proceed.
3 In another pop-up dialog box, select Yes to
Reset the lter counter
Filter counter
1H
200H
O
Filter counter
Filter counter reset
Filter check
Timer
Advanced
To Next Page
Loading...
Need help?
General
