58
Setting
Menu operation
Press < MENU > button on the remote controller or
on the top control panel to display the OSD menu.
Press
button to select the Setting menu ,then
press <OK> or
button
.
1) Press button to select reqiured item.
2) Press <OK> button.
3) Press button to set options.
The projector has Setting fuction, you can select other functions as described
below.
Set power consumption in standby mode,no matter
whenever
your projector is operated through network
1) Press S
2) Press <OK> button.
3) Press button to adjust levels.
Normal ........... Even in standby mode,there are no
restraint on network function and
serial communication function.
Wake On Lan..This mode is to reduce power
consumption and wait for Wake on
Lan magic packet.
Network and RS-232C serial
communication will be unavailable
except the POWER ON command
during that mode.
Eco..................Only RS-232C serial communication
will be available .
Standby mode
HDMI Setup
Setting
Direct Power On
Standby mode
High Altitude
Lamp control
Cooling fast
Closed caption
Key lock
lris
Sound
Off
Eco
Off
Normal
Off
On
Setting menu
HDMI Setup
Setting
Direct Power On
Standby mode
High Altitude
Lamp control
Cooling fast
Closed caption
Key lock
lris
Sound
Off
Eco
Off
Normal
Off
On
Standby mode
You can turn on the projector by connecting the
power cord only.
1) Press
Direct Power On
menu.
2) Press <OK> button.
3) Press button to select reqiured item.
Off...... Get into Standby mode.
On.......Start up immediately.
Direct Power On
HDMI Setup
Setting
Direct Power On
Standby mode
High Altitude
Lamp control
Cooling fast
Closed caption
Key lock
lris
Sound
Off
Eco
Off
Normal
Off
On
Direct Power On
To Next Page
Loading...
Need help?
General
