41
Basic operation
OSD Menu
----
Display
Auto PC adj.
Fine sync 0
0
0
0
H position
V position
H.Size
Aspect Auto
None
Upper left
Blue
Image Flip H/V
Menu position
Background display
Signal Format
1. Press the MENU button on the top control
panel or remote controller and the OSD
displays.
2. Press button to act on or select one
main menu item. Press button or OK
button to enter a submenu.
3. Press button to select required sub-
menu, then press OK button or button to
set up or enter an option.
4. Press button to select settings or nav-
igate options, then press OK button to act
on the item and exit.
5. Press button to return to main menu.
Press the MENU button on remote control-
ler or control panel to exit the OSD.
How to operate the OSD
You can adjust or set up the projector on the
on-screen menu .
The menu has a multilayer structure. Each
main menu is divided into several sub-level
menus, then each submenus is divided into
several submenus.
Please refer to the appropriate section of this
manual for the procedure for the adjustment
and settings.
Top control panel
POWER
MENU MENU OK INPUT
Remote controller
OK
MENU
To Next Page
Loading...
Need help?
General
