48
DISPLAY Menu
HDMI
Input Selection
Test Pattern
Color Space
3D
Background
Auto PC
Auto
Logo
DISPLAY
PICTURE
LASER
ALIGNMENT CONTROL SERVICE
Label Description
Input Selection Press ENTER to enter the Input Selection menu.
Test Pattern Press ENTER to display different test patterns for projector installation
check. Press EXIT or TEST PATTERN to close test pattern.
3D Press ENTER to enter the 3D menu. See “3D Menu” on page 49.
Note:
Before adjusting the 3D setting, ensure the input signal is connected.
Color Space Press ◄ or ► to adjust the color space. The options are Auto, REC709,
REC601, RGB PC or RGB-Video.
Background Press ◄ or ► to specify the image to be background when no signal. The
options are Logo, Blue, Black or White.
Auto PC Press ENTER to execute the auto sync input signal.
To Next Page
Loading...
Need help?
General
