Checking the Ink Status with the Ink Lamps on the Operation Panel
Note
• The ink level detector is mounted on the machine to detect the remaining ink level. The machine
considers as ink is full when a new FINE cartridge is installed, and then starts to detect a remaining ink
level. If you install a used FINE cartridge, the indicated ink level of it may not be correct. In such case,
refer to the ink level information only as a guide.
• When remaining ink cautions or errors occur, the ink lamps and the Alarm lamp will flash to inform you
of the error. Count the number of flashes and take appropriate action.
An Error Occurs
In the copy standby mode, you can check the ink status with the Color Ink lamp and Black Ink lamp.
A: Alarm lamp
B: Color Ink lamp
C: Black Ink lamp
Color Ink lamp or Black Ink lamp lights
The ink is running low. Prepare a new ink cartridge.
The resulting print quality may not be satisfactory, if printing is continued under this condition.
Color Ink lamp or Black Ink lamp flashes, while Alarm lamp flashes
An error has occurred.
An Error Occurs
* For some types of errors, the Alarm lamp may not flash.
Note
• You can also check the ink status on the computer screen.
Checking the Ink Status from Your Computer (Windows)
Checking the Ink Status from Your Computer (Mac OS)
170
To Next Page
Loading...
Need help?
General
