Canon MG3600 series User Manual

What Is ScanGear (Scanner Driver)?
ScanGear (scanner driver) is software required for scanning documents. It enables you to specify the output
size and make image corrections when scanning.
ScanGear can be started from IJ Scan Utility or applications that are compatible with a standard interface
called TWAIN. (ScanGear is a TWAIN-compatible driver.)
What You Can Do with This Software
This software enables you to preview scan results or set document type and output size, etc. when
scanning documents. It is useful when you want to scan in a specific color tone, as it allows you to make
various corrections and adjust brightness, contrast, etc.
Screens
There are two modes: Basic Mode and Advanced Mode.
Switch modes by clicking a tab on the upper right of the screen.
Note
• ScanGear starts in the last used mode.
• Settings are not retained when you switch modes.
Basic Mode
Use the Basic Mode tab to scan easily by following three simple on-screen steps (
, , and
).
Advanced Mode
Use the Advanced Mode tab to specify the color mode, output resolution, image brightness, color tone,
etc. when scanning.
589

Canon MG3600 series Specifications

General

Print Technology	Inkjet
Max Print Resolution	4800 x 1200 dpi
Print Speed (Black)	9.9 ipm
Print Speed (Color)	5.7 ipm
Connectivity	USB, Wi-Fi
Functions	Print, Scan, Copy
Duplex Printing	Manual
Scanner Type	Flatbed
Scanner Resolution	1200 x 2400 dpi
Copier Speed	2.7 ipm (color)
Dimensions	449 x 304 x 152 mm
Weight	5.4 kg
Supported Paper Sizes	Letter, Legal, 4" x 6", 5" x 7"
Mobile Printing	AirPrint