Name: Canon MG3600 series
Brand: Canon
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.

Note

• If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the FINE

cartridge whose ink is low.

You need to prepare: a sheet of A4 or Letter-sized plain paper

Make sure that the power is turned on.

Load a sheet of A4 or Letter-sized plain paper in the front tray.

Open the output tray extension, open the paper output tray, then extend the paper output

support.

Hold down the Stop button until the Alarm lamp flashes once, then release it immediately.

The nozzle check pattern will be printed.

Do not perform any other operations until the machine completes the printing of the nozzle check

pattern.

Examine the nozzle check pattern.

175

Questions and Answers:

Need help?

Do you have a question about the Canon MG3600 series and is the answer not in the manual?

Canon MG3600 series Specifications

General