Name: Canon MG3600 series
Brand: Canon
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Error Message Appears and the ScanGear (Scanner Driver) Screen

Does Not Appear

Check 1

Make sure that your scanner or printer is turned on.

Check 2

Turn off your scanner or printer, then reconnect the USB cable and replug the

power cord.

Check 3

Connect the USB cable to a different USB port on the computer.

Check 4

If the USB cable is connected to a USB hub, remove it from the USB hub and

connect it to a USB port on the computer.

Check 5

Make sure that MP Drivers is installed.

If not installed, install MP Drivers from the Setup CD-ROM or the web page.

Check 6

Select your scanner or printer on the application's menu.

Note

•

The operation may differ depending on the application.

Check 7

Make sure that the application supports TWAIN.

You cannot start ScanGear (scanner driver) from applications not supporting TWAIN.

Check 8

Exit ScanGear if it is running on another application.

769

Questions and Answers:

Need help?

Do you have a question about the Canon MG3600 series and is the answer not in the manual?

Canon MG3600 series Specifications

General