123
Using a Memory Card
Protecting Still images
You can protect important still images from accidental erasure when displaying a single image or the
index screen.
If a memory card is initialized, all still images, even protected ones, will be erased permanently.
Protecting a Single Still Image
1. Select the still image you wish to protect.
2. Press the SELECT/SET dial to open the still image operations menu.
In mode, the menu appears when you press the dial while you are reviewing a still image,
or immediately after recording a still image.
3. Select [ PROTECT].
4. Select [ON].
To remove the protection select [OFF] instead.
5. Select [ CLOSE] to close the menu.
appears and now the image cannot be erased.
Protecting Still Images from the Index Screen
1. Move the zoom lever toward W.
Up to 6 still images appear.
2. Open the menu and select [CARD OPERATIONS]. Select [ PROTECT] and press
the SELECT/SET dial.
3. Select the image you wish to protect and press the dial.
• appears on the image.
• Select additional images with the SELECT/SET dial and protect them in the same way.
4. Close the menu to return to the index screen.
MENU
(27)
CARD OPERATIONS PROTECT
To Next Page
Loading...
Need help?
General
Weight and Dimensions
