Casio DT-X200 Series Software Manual

114
3.5.2 Setting Password for Date and Time
Select Start -> Programs -> Windows Explorer, then open the Windows folder.
(1) Start “passtool” from the window below.
(2) From the dialog below, set the password to input when the terminal starts up.
Item Explanation
Password Only numerals in the range 0~9 are valid (up to 10 digits).
Confirm password Re-input the same value as above for the password.
Note: To cancel the password, leave both Password and Confirm password blank and press the
OK button.

Casio DT-X200 Series Specifications

General

Brand	Casio
Model	DT-X200 Series
Category	Handhelds
Language	English