Casio DT-X200 Series Software Manual

169
3.15.3 Command Line Argument
The command line arguments for this tool are as follows:
No argument
- Operation
Reads the configuration file (ini) and writes it to the non-volatile memory area of the terminal.
The screen displays whether reading succeeded or failed (described later).
- Reference
Manual start from Windows Explorer has no command line argument.
Silent /S
- Usage example
¥Temp¥SetCtryDTX200.exe /S
- Operation
Reads the configuration file (ini) and writes it to the non-volatile memory area of the terminal.
The screen does not display whether reading succeeded or failed.
Success or failure can be judged from the termination status (described later).
If both /S and /D are specified, /D is ignored.
Display configuration value /D
- Usage example
¥Temp¥SetCtryDTX200.exe /D
- Operation
Reads the settings from the non-volatile memory area of the terminal, and displays the content
on the screen.
The configuration file (ini) is not used (the content is displayed on the screen even if there is no
configuration file).
If both /S and /D are specified, /D is ignored.

Casio DT-X200 Series Specifications

General

Brand	Casio
Model	DT-X200 Series
Category	Handhelds
Language	English