30
2.6 Vibrator
Vibrator (vibration) operates for scan complete, alarm occurrence, warning occurrence, wireless
incoming call, and user-defined purpose.
Each vibration operation can be turned on and off individually. The functions of each are as follows:
2.6.1 Vibrator control
There is one level of vibration intensity, and the vibration interval can be set in two different patterns,
the default setting and a user-defined setting.
Pattern Specification Remarks
Default Vibration on for 1 second, off for 1
second x [times]
Maximum no. of times: 20
User Specified vibration period, specified
stop period x [times]
Specification range: Vibration: 1/16s ~
16s
Stop: 1/16s ~ 1s
Maximum no. of times: 20
Type Vibration pattern Individual setting Default
Alarm Default ON/OFF OFF
Warning Default ON/OFF OFF
Barcode scan complete Default ON/OFF OFF
Wireless incoming call Default ON/OFF OFF
User definition User ON/OFF OFF
- The vibrator can be set from a tool or from a private library.
- The vibrator has lower priority.
- The vibrations in the table above can be suppressed from the system library.
For details, refer to the System Library Manual.
- Virtual Off
Vibrator vibration requests are ignored. Vibration that is already in progress is stopped.
Vibrator vibration requests are accepted again on restoration from the virtual off state.
To Next Page
Loading...
Need help?
General