156
3.13 Duplicate a Terminal
Two terminals (parent unit, duplicate) can be connected via Bluetooth, and the content of one
terminal can be duplicated in the other.
3.13.1 Copy Devices Tool
This application can copy various settings and applications installed in one terminal (the parent
unit) to another terminal (the duplicate unit). This process copies all files and folders (including
subfolders) on the FlashDisk. This Copy Devices Tool uses Bluetooth connection.
Transmission content
Target Content
FlashDisk All files on the FlashDisk.
(1) To make the duplicate terminals an exact copy of the parent unit, the content of the child
terminals and the FlashDisk must be cleared prior to performing Copy Devices.
(2) Data on the SD card is not subject to copying, so it must be copied separately, on a PC etc.
(3) Applications can be set up on the duplicated terminal (duplicate) as desired, and modules can
be updated.
Receive mode on the duplicate side
The duplicate side has the following two types of receive mode (copy function).
No. Receive mode Operation
1 Normal Copy Receive the data from the parent unit, finish copying it, then close the
application.
2 Ripple Copy In this mode, the data from the parent unit is received and copying is
finished, then the duplicate becomes the parent unit, and the data is
sent to other duplicates. Therefore the duplicate changes into parent
unit mode and can continue the Copy Devices process to other
duplicates.
To Next Page
Loading...
Need help?
General