Casio DT-X200 Series Software Manual

83
2.15 Wireless LAN
Wireless LAN control is achieved by wireless LAN communications in compliance with the
IEEE802.11 standard, and data communication functions are provided to higher-level applications.
2.15.1 Function summary
(1) Basic functions
The IEEE802.11 standard has the following functions.
Item Content Remarks
Operation mode - Infrastructure mode
- Ad hoc mode
Communication standard 11a/b/g/n
802.11n SISO (1 antenna, 1 stream)
20MHz width
Maximum communication
speed 72.2Mbps
Frequency bands 2.4GHz/ 5GHz (W52/W53/W56)
Encryption WEP (40bit/104bit)/ TKIP/ AES
Authentication method PEAP-EAP-MS-CHAP-V2/EAP-TLS
[Caution]
- Ad hoc mode is supported functionally, but its operation is not guaranteed.
- If the 5GHz W53/W56 frequency band is used, turn the access point stealth setting off.
(If stealth is set, the access point cannot be found and no connection is possible).
(2) Casio expanded features
The following functions are Casio expanded features.
- Power saving (Off)
- Roaming
- Communication standard selection
- Scan channel selection
- Priority frequency band selection
- Multi SSID
(3) Power control functions
This provides functions related to power control for the wireless LAN module.
(4) Data acquisition functions
This provides functions to acquire information such as signal strength and connected access point
through the API.

Casio DT-X200 Series Specifications

General

Brand	Casio
Model	DT-X200 Series
Category	Handhelds
Language	English