145
Other Playback Functions (PLAY MENU)
You can select one of five brightness levels, from +2 (brightest) to –2 (least bright).
• Display a snapshot before performing this operation.
• The original snapshot is retained in memory and not deleted.
• When you display an altered image on the camera’s monitor screen, the date and
time indicates when the image was originally recorded, not when the image was
altered.
See page 172 for details.
• Display a snapshot before performing this operation.
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format
operation (page 195).
Adjusting the Brightness of an Existing Snapshot (Brightness)
Menu item: Brightness
Selecting Images for Printing (DPOF Printing)
Menu item: DPOF Printing
Protecting a File Against Deletion (Protect)
Menu item: Protect
Select File
Protects specific files.
Use [4] and [6] to select the image that
you want to protect.
• To view a particular image, rotate the
zoom controller.
Press [SET].
An image that is protected is indicated by
the › icon.
• To unprotect a file, select an protected image and then press
[SET].
To protect other files, repeat steps
and
.
To exit the protect operation, press [MENU].
All Files
Protects all files.
Use [8] and [2] to select “All Files: On” and then press [SET].
Press [MENU].
To unprotect all files, select “All Files: Off” instead of “All Files: On” in
step
and then press [SET].
To Next Page
Loading...
Need help?
General
