52
Snapshot Tutorial
1. In the REC mode, press [2] ( )
once.
2. Select the flash setting you want and then press [SET].
3. Press the shutter button to shoot.
• For information about Flash Range, see page 237.
Using Flash (Flash)
Setting
REC Screen
Icon Display
Description
Auto Flash None
Flash fires automatically in accordance with
exposure (amount of light and brightness)
conditions.
Flash Off Flash does not fire.
Flash On
Flash always fires. This setting can be used to
brighten a subject that normally comes out dark
due to daylight or backlight (daylight synchro
flash).
Red Eye
Reduction
Flash fires automatically. This type of flash can
be used to reduce the chance of redness in the
subject’s eyes.
Back lamp
Flashes amber while the flash is charging to
indicate that image recording is disabled.
• You will not be able to take another flash
snapshot until the lamp stops flashing amber,
which indicates that charging is complete.
< indicates the flash will fire.
To Next Page
Loading...
Need help?
General
