163
Connecting the Camera with a Smartphone
(Wireless Connection)
You can select one more snapshot and/or movie file in camera memory and send it to
a smartphone. You can select up to 100 snapshot and movies, totaling no more than
500MB, for a single send operation. After sending an image to a smartphone, you can
then upload it to a social networking service.
1. Press [W] (Wireless).
2. Use [8], [2], [4], and [6] to select “Send to phone”, and then press
[SET].
3. Use [8] and [2] to select “Send Selected Image”, and then press
[SET].
4. Use [8], [2], [4], or [6] to move the red boundary to the image you
want to send to the smartphone, and then press [SET].
Selecting the image of a file causes its check box to become selected.
• You can enlarge the selected image by rotating the zoom controller towards
z ([).
• To exit the send image to smartphone operation, press [p] (PLAY).
5. After selecting the images of all of the files you want to send to the
smartphone, press [MENU].
For information about how to use “Send Selected Image”, refer to the EXILIM
Connect manual (page 153).
• Except for protected images, images that are sent will be marked by a “ ”
(image sent) icon (page 15). The image sent icon may not appear when an
image that was shot using another camera is sent.
Sending a Snapshot or Movie File from Camera Memory to a
Smartphone (Send Selected Image)
To Next Page
Loading...
Need help?
General
