166
Connecting the Camera with a Smartphone
(Wireless Connection)
Camera settings can be configured to send images automatically over a wireless
connection to a smartphone after they are recorded.
1. Display “Wireless settings”.
2. Use [8] and [2] to select “Auto Send” and then press [SET].
3. Use [8] and [2] to select the “Auto Send” setting you want and then
press [SET].
• Images that are sent will be marked by a “ ” (image sent) icon (page 15).
IMPORTANT!
• To use any Auto Send setting other than “Off”, you will need to pair the camera with
a smartphone (page 157).
Sending Images from the Camera to a Smartphone as They are
Recorded (Auto Send)
Item name: Auto Send
Setting Description
All
Automatically sends images to the smartphone after they
are shot.
Confirm first
Sends image files selected by you to the smartphone.
• While this setting is selected, “ ” will be displayed on
the monitor screen along with the image you recorded.
Pressing the camera’s [SET] button will cause the
displayed image to be sent to the smartphone.
Off Auto Send disabled.
To Next Page
Loading...
Need help?
General
