160
Manager operation
Programming for the Euro
This procedure is used for defining main/sub currency, currency exchange rate for the Euro, and drawer number for sub
currency at the same time. Please follow the guidance receipts issued in each time during this procedure.
General procedure
Data (Currency definition type)
6 :::::: 6a 6 : 66a
6 s
s
Type 1 procedure
Type 2 procedure
Description Choice Program code
Currency definition type * :
Main = local, sub = Euro, change = local .............. 1
Main = local, sub = Euro, change = Euro .............. 2
Main = Euro, sub = local, change = Euro .............. 3
Euro only (No sub currency).................................. 4
Significant
number
:
D
1
* Once you have chosen one of these numbers, do NOT select the smaller number of the type.
6 01072002s 6 a 6
6
:
a 66
6
6
6
s
refer to type 1 procedure
refer to type 2 procedure
refer to type 3 procedure
refer to type 4 procedure
(enter “1”)
(enter “2”)
(enter “3”)
(enter “4”)
Guidance
message
Guidance
message
Guidance
message
Currency definition type
(1 ~ 4)
MGR
Abortion:
Note: After this operation, the Init 2 (Memory all clear except the program area) is automatically performed.
Guidance
message
Result
printing
Drawer No.
(Cancellation)
(Execution)
Currency conversion rate
Abortion:
6 :::::: 6a6 : 66 a
6 s
s
Abortion:
Guidance
message
Result
printing
Drawer No.
(Cancellation)
(Execution)
Currency conversion rate
* This step is skipped, if the rate had been already set.
To Next Page
Loading...
Need help?
General
