199
Application systems
TE-3000S/4000F/4500F Dealer's Manual
Printing control options for order
Below shows the summary of the programmable options for order printing.
for
Programmable option for R/J
local/
Program
remote
printer
location
Number of feed lines before order printing (1 ~ 9) ✔ Address code 19 of the general control program
Number of feed lines after order printing (1 ~ 9) ✔ Address code 19 of the general control program
Cut order ✔ Address code 19 of the general control program
Show guidance for backup print of order. ✔ Address code 19 of the general control program
Alert when the external printer goes down. ✔ Address code 19 of the general control program
Baud rate ✔ I/O parameter table
Backup destination ✔ Printer connection table
Merge the same item registration on order receipt. ✔✔Address code 19 of the general control program
(Item consolidation)
Breakdown set menu printing on order. ✔✔Address code 19 of the general control program
Print order with amount. ✔✔Address code 19 of the general control program
Print order with order character. ✔✔Address code 19 of the general control program
Print order even if training clerk is registered items. ✔✔Address code 19 of the general control program
Printing color of order ✔ Address code 16 of item program
Definition of order 1 ~ 3 ✔✔Address code 16 of item program
Definition of order character ✔✔Address code 16 of item program
Backup system
If the main destination printer is out of order (such as power failure, or paper out), the terminal sends this data to the backup
destination printer automatically.
Note:
1. The destination of normal registrations is “Receipt 1” (fixed).
“Buffered print” of the address 05 of the general function is necessary.
2. The destination of post receipts/guest receipts is programmable.
“Buffered print” of the address 05 of the general function is NOT necessary.
3. The destination of bill copy is programmable.
“Buffered print” of the address 05 of the general function is necessary.
4. You cannot back up the printouts to the R/J printer to external printers.
That is, R/J printer is the last backup printer.
To Next Page
Loading...
Need help?
General
