Jump
Seat
(Extended
Cab
Models)
Stored Position Folded-Down Position
Your extended cab pickup has jump seats in the rear area. To fold the jump
seat down, pull down
on
the handle
on
the
bottom of the seat until the seat is
in place, then move the seatback to a vertical position.
To store the seat, fold
the seatback down
on the cushion, then push the entire seat up until it is
flush with the trim panels.
Don’t let the safety belts be damaged by the hinges
or
the latches. Safety
belts should be folded and stored between
the
seat cushion and seatback.
Safety Belts: They’re
for
Everyone
This part
of
the manual tells
you
how to use safety belts properly. It also
tells you some things
you
should not
do
with safety belts.
And it explains the Supplemental Inflatable Restraint, or
“air
bag”
system.
A
CAUTION:
Don’t let anyone ride where he or she can’t wear a safety belt
properly.
If
you are in
a
crash and you’re not wearing
a
safety
belt, your injuries can be much worse. You can hit things inside
the vehicle or be ejected from it. You can be seriously injured or
killed. In the same crash,
you
might not be
if
you are buckled
up. Always fasten your safety belt, and check that your
passengers’ belts are fastened properly too.
To Next Page
Loading...
Need help?
General
