Your switches are on
the driver’s side of
your instrument panel.
Push the top switch with the parking lamps symbol on
it
to
turn
on:
0
Parking Lamps
Sidemarker Lamps
Taillamps
License Plate Lamps
Instrument Panel Lamps
0
Transfer Case Indicator Light
(if
you
have
one)
Push the bottom switch with the master lighting symbol on
it
to
turn on all
the lamps listed above as well as the headlamps.
Push
the
side
of
the switch marked
OFF
to
turn
off
your lamps.
Turn
the switch next to the headlamp switch
up
to
make your instrument
panel and transfer case lights brighter. Turn the switch all the way up
to
turn
on
the interior lamps.
You
can switch your headlamps from high to
low
beam by pulling
on
the
multifunction lever.
A
circuit breaker protects your headlamps.
If
you
have
an
electrical
overload, your headlamps
will
flicker on and off. Have your headlamp
wiring checked right away
if
this happens.
2-43
To Next Page
Loading...
Need help?
General
