4.
Run the vehicle’s safety belt through or around the restraint. The child
restraint instructions will show
you
how.
5.
Buckle the belt. Make sure the release button is positioned
so
you
would be able to unbuckle the safety belt quickly if you ever had to.
6.
To
tighten the belt, pull its free end while
you
push down on the child
restraint.
7.
Push and pull the child restraint in different directions
to
be sure it is
secure. If the child restraint isn’t secure, turn the latch plate over and
buckle it again. Then
see
if it
is
secure.
If
it isn’t, secure the restraint in
a different place in the vehicle and contact the child restraint maker for
their advice about how to attach the child restraint properly.
To
remove the child restraint, just unbuckle the vehicle’s safety belt. It will
be ready to work for an adult or larger child passenger.
Center Front Seat Position
(60/40
Split Bench Seat)
Don’t use a child restraint
in
this position. The restraint won’t work properly.
1-29
To Next Page
Loading...
Need help?
General
