Turn Signal and Lane Change Indicator
The turn signal has
two upward (for
Right) and two
downward (for Left)
positions. These
positions allow you
to
signal a turn or
a
lane
change.
To
signal a turn, move the lever all the way up or down. When
the
turn is
finished, the lever will return automatically.
es
A
green arrow on the
instrument panel will
flash in the direction
of the turn or lane
change.
To signal a lane change, just raise or lower the lever
until
the green arrow
starts
to
flash. Hold it there until
you
complete your lane change. The lever
will return by itself when
you
release it.
As
you signal a turn
or
a lane change, if the arrows don’t flash but just stay
on, a signal bulb may be burned out and other drivers won’t see your turn
signal.
If
a bulb is burned out, replace it to help avoid an accident. If the green
arrows don’t go on at all when
you
signal a turn, check the fuse
(see
“Fuses”
in
the Index) and for burned-out bulbs.
If
you have a trailer towing option with added wiring for the trailer lights,
a
different turn signal flasher is used. With
this
flasher installed,
the
signal
indicator will flash even
if
a turn signal bulb is burned out. Check
the
front
and rear turn signal lights regularly
to
make sure they are working.
2-35
To Next Page
Loading...
