Maintenance Schedule
I
57,000
Miles
(95
000
km)
0
Change engine oil and filter (or every
3
months, whichever occurs
first).
An Emission Control Service.
0
Lubricate the front suspension, ball joints, steering linkage and transfer
case shift linkage, parking brake cable guides, propshaft splines,
universal joints, brake pedal springs, and clutch pedal springs (or every
6
months, whichever occurs first).
0
Check readfront
axle
fluid level and add fluid as needed. Check
constant
velocity joints and axle seals for leaking.q:*
-
DATE
SERVICED
BY:
ACTUAL MILEAGE
I
60,000
Miles
(100
000
km)
0
Change engine oil and filter
(or
every
3
months, whichever occurs
first).
An Emission Control Service.
0
Lubricate the front suspension, ball joints, steering linkage and transfer
case shift linkage, parking brake cable guides, propshaft splines,
universal joints, brake pedal springs, and clutch pedal springs (or every
6
months, whichever occurs first).
constant velocity joints and axle seals for leaking?
0
Check readfront axle fluid level and add fluid as needed. Check
0
For 2-Wheel Drive vehicles
only:
Clean and repack the front wheel
0
Inspect engine accessory drive belt.
An Emission Control Service.
0
Drain, flush and refill cooling system (or every
24
months, whichever
bearings (or at each brake relining, whichever occurs first).
occurs first). See “Engine Coolant” in the Index for what
to
use.
Inspect hoses. Clean radiator, condenser, pressure cap and neck.
Pressure test the cooling system and pressure cap.
An Emission Control
Service.
0
Replace spark plugs (except 2.2L Code
4
engine).
An Emission Control
Service.
(Continued)
7-
17