NOTICE:
Your engine is designed to work with the electronics in your
vehicle.
If
you add electrical parts or accessories, you could
change the way the fuel injection system operates. Before adding
electrical equipment, check with your dealer.
If
you don’t, your
engine might not perform properly.
If
you ever have to have your vehicle towed, see the part of this
manual that tells how to do it without damaging your vehicle.
See “Towing Your Vehicle” in the Index.
To
start your
4.3
Liter Code
W
engine:
1.
Without pushing the accelerator pedal, turn your ignition key
to
START. When the engine starts, let go
of
the
key.
The idle speed will
go
down
as
your engine gets warm.
NOTICE:
Holding your key in
START
for longer than
15
seconds at
a
time
will cause your battery to be drained much sooner. And the
excessive heat can damage your starter motor.
2.
If
it doesn’t start right away, hold your key
in
START.
If
it doesn’t start
in
10
seconds, push the accelerator pedal all
the
way down for
5
seconds,
or
until it starts.
3.
If
your engine still won’t start, wait
15
seconds to let the starter motor
cool down and do it all again.
When the engine starts, let go
of
the key and the accelerator pedal.
To Next Page
Loading...
Need help?
General
