Cisco 7600 Series User Manual

3-51
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
OL-5052-08
Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters
5-Port Gigabit Ethernet SPA Overview
SFP-GE-S Modules
The 1000BASE-SX (short wavelength) module operates on standard multimode fiber-optic link spans of
up to 500m on 50/125um MMF and 300 m on 62.5/125um MMF.
SFP-GE-L Modules
The 1000BASE-LX/LH (long wavelength/long haul) module interfaces fully comply with the IEEE
802.3z 1000BASE-LX standard. However, their higher optical quality allows them to reach 6.2 miles (10
km) over single-mode fiber (SMF) versus the 3.1 miles (5 km) specified in the standard.
SFP-GE-Z Extended distance
(1000BASE-ZX)
Contains a Class 1 laser of 1550 nm for
1000BASE-ZX (extended wavelength)
applications.
SFP-GE-T Gigabit Ethernet SFP
module—1000BASE-T
1000BASE-T SFP Transceiver Module for
Category 5 copper wire
Table 3-32 SFP Module Specifications
Specification Description
Connectors LC-type connector
Wavelength SFP-GE-S: 830-860 nm
SFP-GE-L: 1270-1360 nm
SFP-GE-Z: 1540-1570 nm
SFP-GE-T: N/A
Cabling distance
(maximum)
SFP-GE-S: 500m on 50/125um MMF. 300m on
62.5/125um MMF.
SFP-GE-L: 6.2 miles (10 km)
SFP-GE-Z: 49.7 miles (80 km)
SFP-GE-T: 328 ft. (100 m)
Operating temperature range SFP-GE-S:-20 to 90 degrees C
SFP-GE-L:-40 to 85 degrees C
SFP-GE-Z: 0 to 85 degrees C
SFP-GE-T: 0 to 70 degrees C
Storage temperature range SFP-GE-S: -40 to 100 degrees C
SFP-GE-L: -40 to 100 degrees C
SFP-GE-Z: -40 to 85 degrees C
SFP-GE-T: -40 to 85 degrees C
Supply Voltage range SFP-GE-S: 3.0 to 3.6 V
SFP-GE-L: 3.0 to 3.6 V
SFP-GE-Z: 0 to 4.0 V
SFP-GE-T: 3.1 to 3.5 V
Table 3-31 SFP Module Options
SFP Module
Product Number SFP Module Description

Cisco 7600 Series Specifications

General

Brand	Cisco
Model	7600 Series
Category	Network Router
Language	English