Cisco 7600 Series User Manual

3-54
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
OL-5052-08
Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters
10-Port Gigabit Ethernet SPA Overview
10-Port Gigabit Ethernet SPA Overview
The following sections describe the 10-Port Gigabit Ethernet SPA:
• 10-Port Gigabit Ethernet SPA LEDs, page 3-54
• SFP-GE-S Modules, page 3-56
• SFP-GE-L Modules, page 3-56
• SFP-GE-Z Modules, page 3-56
• SFP-GE-T Modules, page 3-57
• SFP Module Cabling and Connection Equipment, page 3-52
10-Port Gigabit Ethernet SPA LEDs
The 10-Port Gigabit Ethernet SPA has two types of LEDs. There is an A/L LED for the port and one
Status LED as shown in Figure 3-39.
Figure 3-39 10-Port Gigabit Ethernet SPA Faceplate
The 10-Port Gigabit Ethernet SPA LEDs are described in Table 3-34.
1 A/L LED 2 STATUS LED
Table 3-34 10-Port Gigabit Ethernet SPA LEDs
LED Label Color State Meaning
Active/Link Off Off Port is not enabled.
Green On The port is enabled and the link is up.
Amber On The port is enabled and the link is down.
STATUS Off Off SPA power is off.
Amber On SPA power is on and good, and SPA is being configured.
Green On SPA is ready and operational.

Cisco 7600 Series Specifications

General

Brand	Cisco
Model	7600 Series
Category	Network Router
Language	English