Cisco 7821 Administration Guide

• Four M4 x 25-mm Phillips-head screws with four anchors
• Two M3 x 7-mm Self-tapping screws
• One 200-mm Ethernet cable
This section describes how to install and remove the ADA nonlockable wall mount kit.
Figure 21: Back View of ADA Non-Lockable Wall Mount Kit Installed on Phone
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
108
Hardware and Accessory Installation
Non-Lockable Wall Mount Components for 7861

Cisco 7821 Specifications

General

Brand	Cisco
Model	7821
Category	IP Phone
Language	English