Cisco 7941G - Unified IP Phone VoIP User Manual

4-15
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
Related Topics
• Displaying a Configuration Menu, page 4-2
• Unlocking and Locking Options, page 4-3
• Editing Values, page 4-4
• Overview of Options Configurable from a Phone, page 4-5
• Device Configuration Menu, page 4-16
PC VLAN Allows the phone to interoperate with
third-party switches that do not support a voice
VLAN.
The Admin VLAN ID option must be set before
using this option.
1. Unlock network
configuration options.
2. Make sure the Admin
VLAN ID is set (see Admin
VLAN ID above in this
table).
3. Scroll to the PC VLAN
option, press the Edit
softkey, and then enter a new
PC VLAN setting.
4. Press the Validate softkey
and then press the Save
softkey.
Connection
Monitor Duration
Time, in seconds, after a failover that the link
between the phone and a Cisco
Unified
Communications Manager server must
remain stable (with no link-flapping) before the
phone falls back from SRST to the Cisco
Unified
Communications Manager server
Use Cisco Unified
Communications Manager
Administration to modify.
Table 4-2 Network Configuration Menu Options (continued)
Option Description To Change

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English