Cisco 7941G - Unified IP Phone VoIP User Manual

5-31
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Chapter 5 Configuring Features, Templates, Services, and Users
Managing the User Options Web Pages
Giving Users Access to the User Options Web Pages
Before a user can access the User Options web pages, you must use Cisco Unified
Communications Manager Administration to add the user to a standard Cisco
Unified Communications Manager end user group: choose User Management >
User Groups.
For additional information, refer to Cisco Unified Communications Manager
Administration Guide, “End User Configuration” section.
Specifying Options that Appear on the User Options Web Pages
Most options that are on the User Options web pages appear by default. However,
the following options must be set by the system administrator by using Enterprise
Parameters Configuration settings in Cisco Unified Communications Manager
Administration:
• Show Ring Settings
• Show Line Text Label Settings
• Show Call Forwarding
Note The settings apply to all User Options web pages at your site.
To specify the options that appear on the User Options web pages, follow these
steps:
Procedure
Step 1 From Cisco Unified Communications Manager Administration, choose System >
Enterprise Parameters.
The Enterprise Parameters Configuration window appears.
Step 2 In the CCMUser Parameters area, specify whether a parameter appears on the
User Options web pages by choosing one of these values from the Parameter
Value drop-down list box for the parameter:
• True—Option displays on the User Options web pages (default except for
Show Ring Settings, Show Line Text Label, and Show Call Forwarding).

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English