Cisco 7941G - Unified IP Phone VoIP User Manual

4-27
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
UI Configuration Menu
The UI Configuration menu displays the status of various user interface features
on the phone.
NTP Mode 1 Primary server mode. Supported modes
are Directed Broadcast, Unicast,
Multicast, and Any cast.
From Cisco Unified Communications
Manager Administration,
System > Phone NTP Reference.
NTP Mode 2 Secondary server mode. Supported
modes are Directed Broadcast, Unicast,
Multicast, and Any cast.
From Cisco Unified Communications
Manager Administration,
System > Phone NTP Reference.
Table 4-8 NTP Configuration Menu Options (continued)
Option Description To Change
Ta b l e 4-9 UI Configuration Menu Options
Option Description To Change
Auto Line Select Indicates whether the phone shifts the
call focus to incoming calls on all lines.
When this option is disabled, the phone
only shifts the call focus to incoming
calls on the line that is in use. When
this option is enabled, the phone shifts
the call focus to the line with the most
recent incoming call.
Default: Disabled
Use Cisco Unified Communications
Manager Administration,
Device
> Phone >
Phone Configuration.
BLF for Call
Lists
Indicates whether the Busy Lamp Field
(BLF) is enabled for call lists.
From Cisco Unified Communications
Manager Administration,
System > Enterprise Parameters.

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English