Cisco 7941G - Unified IP Phone VoIP User Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
4-28
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Reverting Focus
Priority
Indicates whether the phone shifts the
call focus on the phone screen to an
incoming call or a reverting hold call.
Settings include:
Lower—Focus priority given to
incoming calls.
Higher —Focus priority given to
reverting calls.
Even —Focus priority given to the first
call.
Use Cisco Unified Communications
Manager Administration,
System > Device Pool
Auto Call Select Indicates whether the phone
automatically shifts the call focus to an
incoming call on the same line when
the user is already on a call.
When this option is enabled, the phone
shifts the call focus to the most recent
incoming call.
When this option is disabled, all
automatic focus changes, including
Auto Line Select, are disabled
regardless of their setting.
Default: Enabled
From Cisco Unified Communications
Manager Administration,
Device
> Phone >
Phone Configuration.
“more” Softkey
Timer
Indicates the number of seconds that
additional softkeys are displayed after
the user presses more. If this timer
expires before the user presses another
softkey, the display reverts to the initial
softkeys.
Range: 5 to 30; 0 represents an infinite
timer.
Default: 5
From Cisco Unified Communications
Manager Administration,
Device
> Phone >
Phone Configuration.
Table 4-9 UI Configuration Menu Options (continued)
Option Description To Change

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English