Cisco 7941G - Unified IP Phone VoIP User Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
4-26
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
NTP Configuration Menu
The NTP Configuration menu, which opens when you select NTP Configuration
on the Locale Configuration menu, displays information about the NTP server and
mode configuration used by the phone.
Table 4-8 describes the options on this
menu. For more information, see Locale Configuration Menu, page 4-25.
Network Locale Network locale associated with the
phone user. The network locale
identifies a set of detailed information
that supports the phone in a specific
location, including definitions of the
tones and cadences used by the phone.
From Cisco Unified Communications
Manager Administration,
Device
> Phone >
Phone Configuration.
Network Locale
Ve r si on
Version of the network locale loaded on
the phone.
Display only—cannot configure.
NTP
Configuration
(SIP phones
only)
Menu to view information on NTP
server and mode configuration. For
more information, see
NTP
Configuration Menu, page 4-26.
From Cisco Unified Communications
Manager Administration,
System > Phone NTP Reference.
Table 4-7 Locale Configuration Menu Options (continued)
Option Description To Change
Ta b l e 4-8 NTP Configuration Menu Options
Option Description To Change
NTP Server 1 IP address of the primary NTP server. From Cisco Unified Communications
Manager Administration,
System > Phone NTP Reference.
NTP Server 2 IP address of the secondary or backup
NTP server.
From Cisco Unified Communications
Manager Administration,
System > Phone NTP Reference.

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English