Cisco 7941G - Unified IP Phone VoIP User Manual

CHAPTER
3-1
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
3
Setting Up the Cisco Unified IP Phone
This chapter includes the following topics, which help you install the
Cisco
Unified IP Phone on an IP telephony network:
• Before You Begin, page 3-2
• Understanding the Cisco Unified IP Phone 7961G/7961G-GE and
7941G/7941G-GE Components, page 3-3
• Installing the Cisco Unified IP Phone, page 3-7
• Attaching the Cisco Unified IP Phone Expansion Module 7914 (SCCP
Phones Only), page 3-11
• Adjusting the Placement of the Cisco Unified IP Phone, page 3-13
• Verifying the Phone Startup Process, page 3-16
• Configuring Startup Network Settings, page 3-18
• Configuring Security on the Cisco Unified IP Phone, page 3-18
Note Before you install a Cisco Unified IP phone, you must decide how to configure
the phone in your network. Then you can install the phone and verify its
functionality. For more information, see
Chapter 2, “Preparing to Install the Cisco
Unified IP Phone on Your Network.”

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English