Cisco 7941G - Unified IP Phone VoIP User Manual

1-27
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco Unified IP Phones
• Configuring Cisco Unified IP Phones in Cisco Unified Communications
Manager, page 1-27
• Installing Cisco Unified IP Phones, page 1-32
Configuring Cisco Unified IP Phones in Cisco Unified
Communications Manager
To add phones to the Cisco Unified Communications Manager database, you can
use:
• Auto-registration
• Cisco Unified Communications Manager Administration
• Bulk Administration Tool (BAT)
• BAT and the Tool for Auto-Registered Phones Support (TAPS)
For more information about these choices, see the “Adding Phones to the Cisco
Unified Communications Manager Database” section on page 2-14.
For general information about configuring phones in Cisco Unified
Communications Manager, refer to the “Cisco
Unified IP Phone” chapter in Cisco
Unified Communications Manager System Guide.
Checklist for Configuring the Cisco Unified IP Phone 7961G/7961G-GE and
7941G/7941G-GE in Cisco Unified Communications Manager
Table 1-6 provides an overview and checklist of configuration tasks for the
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE in
Cisco
Unified Communications Manager Administration. The list presents a
suggested order to guide you through the phone configuration process. Some tasks
are optional, depending on your system and user needs. For detailed procedures
and information, refer to the sources in the list.

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English