Cisco 7941G - Unified IP Phone VoIP User Manual

4-5
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Overview of Options Configurable from a Phone
• Press the Cancel softkey before pressing the Save softkey to discard any
changes that you have made.
Note The Cisco Unified IP Phone provides several methods you can use to reset or
restore option settings, if necessary. For more information, see the
“Resetting or
Restoring the Cisco Unified IP Phone” section on page 9-18.
Related Topics
• Displaying a Configuration Menu, page 4-2
• Unlocking and Locking Options, page 4-3
• Overview of Options Configurable from a Phone, page 4-5
• Network Configuration Menu, page 4-7
• Device Configuration Menu, page 4-16
Overview of Options Configurable from a Phone
The settings that you can change on a phone fall into several categories, as shown
in
Table 4-1. For a detailed explanation of each setting and instructions for
changing them, see the “Network Configuration Menu” section on page 4-7.
Note There are several options on the Network Configuration menu and on the Device
Configuration Menu that are for display only or that you can configure from
Cisco
Unified Communications Manager. These options are also described in the
“Network Configuration Menu” section on page 4-7 or the “Device Configuration
Menu” section on page 4-16.

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English