Cisco 7941G - Unified IP Phone VoIP User Manual

Chapter 6 Customizing the Cisco Unified IP Phone
Creating Custom Phone Rings
6-2
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
• admin:file
– file list*
– file view*
– file search*
– file get*
– file dump*
– file tail*
– file delete*
Creating Custom Phone Rings
The Cisco Unified IP Phone ships with two default ring types that are
implemented in hardware: Chirp1 and Chirp2. Cisco
Unified Communications
Manager also provides a default set of additional phone ring sounds that are
implemented in software as pulse code modulation (PCM) files. The PCM files,
along with an XML file (named Ringlist.xml) that describes the ring list options
that are available at your site, exist in the TFTP directory on each
Cisco
Unified Communications Manager server.
For more information, see the “Cisco TFTP” chapter in Cisco Unified
Communications Manager System Guide and the “Software Upgrades” chapter in
Cisco Unified Communications Operating System Administration Guide.
The following sections describe how you can customize the phone rings that are
available at your site by creating PCM files and editing the Ringlist.xml file:
• Ringlist.xml File Format Requirements, page 6-3
• PCM File Requirements for Custom Ring Types, page 6-4
• Configuring a Custom Phone Ring, page 6-4

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English