7-3
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Status Menu
Status Menu
To display the Status menu, press the Settings button and then select Status. To
exit the Status menu, press the Exit softkey.
The Status menu includes theses options, which provide information about the
phone and its operation:
• Status Messages—Displays the Status Messages screen, which shows a log of
important system messages. For more information, see the
“Status Messages
Screen” section on page 7-4.
• Network Statistics—Displays the Network Statistics screen, which shows
Ethernet traffic statistics. For more information, see the
“Network Statistics
Screen” section on page 7-12.
• Firmware Versions—Displays the Firmware Versions screen, which shows
information about the firmware running on the phone. For more information,
see the
“Firmware Versions Screen” section on page 7-14.
• Expansion Modules (SCCP phones only)—Displays the Expansion
Module(s) screen, which shows information about the Cisco
Unified IP
Phone Expansion Module 7914, if it is connected to the phone. For more
information, see the
“Expansion Module Status Screen (SCCP Phones Only)”
section on page 7-15.
LSC Indicates whether a locally significant
certificate (used for the security
features) is installed on the phone or is
not installed on the phone.
For more information about how to
manage the LSC for your phone, refer to
the “Using the Certificate Authority
Proxy Function” section in Cisco Unified
Communications Manager Security
Guide.
Call Control
Protocol
Indicates the call processing protocol
used by the phone.
See the “Using Cisco Unified IP Phones
with Different Protocols” section on
page 2-19.
Table 7-1 Model Information Settings (continued)
Option Description To Change
To Next Page
Loading...
Need help?
General