Cisco 7941G - Unified IP Phone VoIP User Manual

4-7
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
Network Configuration Menu
The Network Configuration menu provides options for viewing and making a
variety of network settings.
Table 4-2 describes these options and, where
applicable, explains how to change them.
For information about how to access the Network Configuration menu, see the
“Displaying a Configuration Menu” section on page 4-2.
Note The phone also has a Network Configuration menu that you access directly from
the Settings menu. For information about the options on that menu, see the
“Network Configuration Menu” section on page 4-40.
Before you can change an option on this menu, you must unlock options as
described in the
“Unlocking and Locking Options” section on page 4-3. The Edit,
Yes , or No softkeys for changing network configuration options display only if
options are unlocked.
For information about the keys you can use to edit options, see the “Editing
Values” section on page 4-4.
Ta b l e 4-2 Network Configuration Menu Options
Option Description To Change
DHCP Server IP address of the Dynamic Host Configuration
Protocol (DHCP) server from which the phone
obtains its IP address.
Display only—cannot configure.
BOOTP Server Indicates whether the phone obtains its
configuration from a Bootstrap Protocol
(BootP) server instead of from a DHCP server.
Display only—cannot configure.
MAC Address Unique Media Access Control (MAC) address
of the phone.
Display only—cannot configure.
Host Name Unique host name that the DHCP server
assigned to the phone.
Display only—cannot configure.

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English